From Seed to Sprout: Setting up the Start Line
For germination and delicate early growth, our Light·Mix® substrate provides an airy, low-EC environment that helps seedlings and cuttings establish without heavy initial feeding. It’s designed as a lightly fertilized mix for gentle starts and easy drainage, and it can be used straight out of the bag for propagation phases.
To encourage strong root formation from day one, growers pair Light·Mix with Root·Juice™. Root·Juice is a 100% vegetable-based stimulator that combines humic substances with seaweed (kelp) extract, formulated to promote vigorous root development and overall root-zone health. Recommended use is 1–4 mL per liter of water; many growers stay near 1–2 mL/L for seedlings and early cuttings, increasing toward 4 mL/L as plants establish.
At a glance (early stage essentials):
• Substrate: Light·Mix – low-EC, seedling friendly.
• Rooting support: Root·Juice – 1–4 mL/L, especially helpful during propagation and after transplant.
Building the Living Foundation: Soil Choices & Conditioners
As plants graduate from propagation, many growers move to All·Mix®, our pre-fertilized soil blend designed to emulate a rich, biologically active outdoor soil. It’s intended to serve as a strong base that carries plants through early vegetative growth before additional feed is required.
To modify or refresh soil, two dry inputs are widely used:
• Worm·Humus® – a natural source of organic matter used to amend soil mixes.
• Pre·Mix® – a dry amendment that supplies a balanced blend of long-lasting nutrition and trace elements for ongoing fertility.
Prefer coco? Coco·Mix® offers a coco-fiber base that pairs well with our organic liquids (and is often combined with added calcium/magnesium, as is typical for coco).
Vegetative Momentum: Our Core Growth Nutrients
Once seedlings establish, the demand for nitrogen and consistent mineral availability increases. Two BioBizz staples support this stage:
Bio·Grow®
Bio·Grow is formulated from Dutch sugar-beet extract (vinasse). Its natural sugars feed beneficial microbes in the rhizosphere and support vigorous vegetative growth. Begin at about 1 mL/L once the plant has a few sets of true leaves, then adjust into the 2–4 mL/L range as size and demand increase.
Fish·Mix™
Fish·Mix combines North Sea fish emulsion with Dutch sugar-beet extract. It’s typically used in vegetative growth on soil or coco and can also be applied as a mild foliar spray early in veg. Typical irrigation rates are 1–4 mL/L, adjusting to plant size and vigor.
Optional foliar tonic in veg: Alg·A·Mic™, a cold-pressed seaweed concentrate, is used to help plants cope with environmental stress while supporting lush green leaves.
Transitioning to Bloom: Flower Support That Fits Organic Systems
When plants initiate flowering, Bio·Bloom™ becomes the central input. Bio·Bloom is a complete liquid organic fertilizer for the bloom stage, providing the P and K needed for flower formation and fruit set. A common ramp is ~1 mL/L at early bloom, increasing through mid-bloom as demand rises.
To complement Bio·Bloom, growers often include Top·Max™, a bloom stimulator based on humic and fulvic substances (from leonardite). It’s used throughout flowering and is compatible with our substrates. Many schedules start ~1 mL/L and increase toward 4 mL/L later in bloom.
At a glance (bloom essentials):
• Base: Bio·Bloom – complete liquid organic bloom fertilizer.
• Booster: Top·Max – humic/fulvic-based bloom stimulator, used from early bloom to harvest.
Microbial Partners: When to Add BioBizz Microbes
BioBizz Microbes is a powdered inoculant designed to be mixed in water and applied primarily to the root zone. The recommended dose is 0.2–0.4 g per liter once per week; during periods of high nutrient demand (for example, peak veg or peak bloom), using it twice weekly is suggested. Mix after other nutrients are added to your tank, stir for about two minutes, and apply promptly.
These instructions are reflected in our nutrient schedules, which visually map dosage ranges by week for soil, coco, and related systems. You’ll also see “flush with water” callouts in the chart to help signal the typical wrap-up period before harvest.
Practical Feeding Framework (Soil Example)
Below is a straightforward, fact-based way growers commonly align our products with plant stages. Always tailor to your cultivar and environment, using the official chart as your baseline.
Propagation / Early Veg
• Substrate: Light·Mix (seedlings, clones).
• Rooting: Root·Juice 1–2 mL/L initially; increase toward 4 mL/L as plants establish.
• Base nutrient: Introduce Bio·Grow ~1 mL/L when true leaves develop.
Vegetative Growth
• Base nutrient: Bio·Grow 2–4 mL/L as biomass increases.
• Optional nitrogen support: Fish·Mix 1–4 mL/L (soil or coco).
• Foliar tonic (optional): Alg·A·Mic as directed.
Flower Initiation to Mid Bloom
• Base bloom: Bio·Bloom, starting ~1 mL/L and increasing per schedule.
• Bloom stimulator: Top·Max, typically 1 → 4 mL/L over the flowering window.
• Microbial support: BioBizz Microbes 0.2–0.4 g/L weekly; twice weekly at peak demand.
Ripening & Finish
• Follow the chart’s late-stage guidance and the indicated flush period (“flush with water”) before harvest.
Leaf Protection Within an Organic Program
For foliar protection within an organic system, Leaf·Coat™ is a ready-to-use spray made from natural latex. It forms a micro-thin, permeable film (about 1.5 µm) that allows air and light to pass while creating a temporary barrier on foliage. Apply straight from the bottle, typically once or twice per week, and discontinue roughly two weeks before the end of flowering to allow the coating to break down naturally.
Leaf·Coat helps strengthen leaves and protect against unwanted insects and damaging leaf fungi, and it was originally developed to reduce evaporation; the latex layer biodegrades over time.
Harvest-Ready: What Our Charts Indicate Near the Finish Line
Our free feeding charts illustrate stage-by-stage application rates for Bio·Grow, Fish·Mix, Bio·Bloom, Top·Max, Acti·Vera and other inputs, across indoor and outdoor settings. They include week markers for both vegetative and flowering phases and show when to taper certain inputs and when to flush with water. Use them as your baseline and adapt to your cultivar’s behavior.
Key Takeaways
- Match the medium to the moment: Light·Mix for gentle starts; All·Mix for a pre-fertilized base as plants grow; Coco·Mix for coco-based systems.
- Build roots first: Root·Juice (1–4 mL/L) supports early root mass and transplant success.
- Feed the phase: Bio·Grow for veg, Fish·Mix as a flexible N source, then Bio·Bloom in flower with Top·Max as a humic/fulvic booster.
- Invite biology: BioBizz Microbes at 0.2–0.4 g/L weekly (twice weekly at peak demand) keeps the root-zone microbiology active.
- Protect leaves organically: Leaf·Coat is ready to use and forms a micro-thin, self-degrading protective film; stop ~2 weeks before harvest.
Frequently Asked Questions
Can I use BioBizz in soil and coco?
Yes. Our liquids (e.g., Bio·Grow, Fish·Mix, Bio·Bloom, Top·Max) are used in soil and coco systems. When using coco, it’s common practice to ensure adequate Ca/Mg supplementation.
How often should I apply BioBizz Microbes?
Use 0.2–0.4 g/L once a week; during high-demand windows, apply twice weekly. Mix it after other nutrients, stir for ~2 minutes, and apply promptly.
Is there a recommended way to time my finish?
Refer to the official feeding charts. They show week-by-week dosing and the typical “flush with water” period leading into harvest.
Where can I find the product schedules and more details?
Check the downloadable feeding chart and product data sheets on our site.
